- Description
- Download
Specifications
Weight:
1.75kg
Dimension:
295W*240D*73H mm
Power supply:
AC220V 20 50Hz or 8.4V Li-battery
*Compact and lightweight design
*7" color TFT screen, folding 90 degrees
*Built-in high dot matrix thermal printer with long life
*A standard patient event marker and a clinical event marking button to mark clinical events separately.
*Auto fetal movement are available.
*Multi-crystals, wide beam forming, high sensitivity ultrasound transducer, low ultrasound power
*AC or Li-ion battery
*More than 12 hours data storage, which can be recalled and reprinted.
Technical Specifications
Fetal Heart Rate
Transducer:Multi-crystal,pulsed doppler,high sensitive.
Strengh:<5mW/c㎡
Working frequency:1.0MHz
Signal processing:special DSP system and mode recognization
Measurement range:50~210bpm
Alarm Range:High:160 170 180 190 bpm
Low:90 100 110 120 bpm
The largest audio output power:1.5W
TOCO
Measurement range:0~100units
Battery working time:2 hours(no printer working)
Speaker:1W
Power Supply:AC220V 20 50Hz or 8.4V Li-battery
Power consumption:<20W
Working Environment:Temperature 10~40 RH 10~80%
Under the requirements laid down in IEC 1157, 1992, the peak
TransducerAcoustic Output:negative acoustic pressure does not exceed 1Mpa. The output beam intensity does not exceed 20mW/c㎡ and the spatial-peak temporal-average intensity does not exceed 100mW/c㎡
Dimension:295W 240D 73H (mm)
Net weight:1.75kg
Standard:FHR, TOCO, FM
Optional:Twins